Modeve POS supports barcode scanning to help you add products faster during sales or when managing inventory.
Before using the barcode scanner:
Allow Camera permission for the Modeve POS app.
Ensure the product has a valid barcode saved in the system.
Use the device in a well-lit environment for better scanning results.
Go to the Sales or Checkout screen.
Tap the Barcode Scanner icon.
Point the camera at the product barcode.
Hold the device steady until the barcode is recognised.
The product will be added to the cart automatically.
You can continue scanning other products one by one. Each successful scan will add the item to the cart.
When creating or editing a product, look for the Barcode field.
Tap the scanner icon next to the field.
Point the camera at the barcode.
The barcode number will be filled in automatically.
This helps avoid typing errors when entering barcode numbers.
Make sure the barcode is not damaged, wrinkled, or covered.
Hold the camera at a steady distance (usually 10–20 cm from the barcode).
Ensure there is enough light.
Avoid scanning under strong reflections or glare.
If the scan fails, try adjusting the angle or distance slightly.
Problem | Possible Solution |
|---|---|
Scanner does not open | Check that camera permission is allowed |
Barcode not recognised | Confirm the barcode is correctly saved in the product |
Camera is black / not working | Restart the app or check device camera settings |
Wrong product added | Verify the barcode is unique and correctly linked |
If scanning continues to fail, you can still add products manually by searching or selecting them from the product list.